Materials

Water-repellent "armor" stands up to cuts and abrasions

Water-repellent "armor" stands up to cuts and abrasions
Hydrophobic surfaces cause water to bead up and roll off – and superhydrophobic surfaces do so even more
Hydrophobic surfaces cause water to bead up and roll off – and superhydrophobic surfaces do so even more
View 2 Images
A cross-sectional diagram of the armor
1/2
A cross-sectional diagram of the armor
Hydrophobic surfaces cause water to bead up and roll off – and superhydrophobic surfaces do so even more
2/2
Hydrophobic surfaces cause water to bead up and roll off – and superhydrophobic surfaces do so even more

Among other things, hydrophobic (water-repelling) surfaces can be used to keep medical devices germ-free, to help airplane wings shed ice, and to keep solar panels clean. A new process could soon make those surfaces much more durable, allowing them to ward off water for a longer time.

Most of the hydrophobic surfaces we've seen incorporate "forests" of nanostructures that protrude upwards from the substrate. Because water droplets are unable to get down in between these structures, they instead bead up on top and then roll off. As they do so, they carry dirt, germs or other contaminants with them.

Unfortunately, though, those nanostructures are often quite fragile. This means that through regular wear and tear, they're often cut or abraded away. As a result, the surface loses its hydrophobicity in those areas.

Scientists from Finland's Aalto University, and the University of Electronic Science and Technology of China, have developed an "armor" that they claim is a solution to that problem.

Their process involves first etching a honeycomb-pattern grid of nanoscale inverted pyramids onto a substrate such as metal, glass or ceramic. A superhydrophobic chemical coating is then applied to the inside of the pyramids. When an instrument such as a sharp blade or a piece of sandpaper is subsequently drawn across the armored surface, the ridges between the pyramids keep it from getting down inside, protecting the coating within.

A cross-sectional diagram of the armor
A cross-sectional diagram of the armor

Along with the blade and sandpaper, the scientists have also subjected treated surfaces to high-pressure water jets, extreme humidity, hours of immersion in corrosive chemicals, and weeks of being baked at 100 ºC (212 ºF). In all cases, those surfaces retained their superhydrophobic functionality.

"We made the armor with honeycombs of different sizes, shapes and materials," says Aalto's Prof. Robin Ras. "The beauty of this result is that it is a generic concept that fits for many different materials, giving us the flexibility to design a wide range of durable waterproof surfaces."

A paper on the research was recently published in the journal Nature.

Source: Aalto University

4 comments
4 comments
windykites
What happened to Teflon coating?
Expanded Viewpoint
It was too soft and not durable, so it didn't stick around.
Signguy
Bring this to market fast! Teflon is toxic when it breaks down.
Saigvre
Oh joy for solar siding that doesn't have to weigh itself down with glass panels so much. Or fun resilient gutters below all that hydrophobic siding that esconces the water until needed.