Science

Regenerating plastic is better on the "hole"

Regenerating plastic is better on the "hole"
A regenerative plastic developed at the University of Illinois seals up more than cracks
A regenerative plastic developed at the University of Illinois seals up more than cracks
View 16 Images
Angled view showing the two streams of gel-forming fluid
1/16
Angled view showing the two streams of gel-forming fluid
The capillaries are formed by disintegrating fibers.
2/16
The capillaries are formed by disintegrating fibers.
Regenerative gel squirting into a cavity
3/16
Regenerative gel squirting into a cavity
Cavity with gel formation halfway through process
4/16
Cavity with gel formation halfway through process
Cavity with gel forming to act as scaffold for more regenerative plastic
5/16
Cavity with gel forming to act as scaffold for more regenerative plastic
Cavity partially sealed with regenerative plastic gel
6/16
Cavity partially sealed with regenerative plastic gel
Cavity sealed with regenerative plastic gel
7/16
Cavity sealed with regenerative plastic gel
Regenerative gel forming in cracks as the two fluids mix to heal the damage
8/16
Regenerative gel forming in cracks as the two fluids mix to heal the damage
Hole and cracks partially sealed with gel
9/16
Hole and cracks partially sealed with gel
Hole and cracks sealed with regenerative plastic gel
10/16
Hole and cracks sealed with regenerative plastic gel
11/16
Sequence of
12/16
Sequence of
Experimental set up for studying plastic regeneration
13/16
Experimental set up for studying plastic regeneration
A 9 mm hole in a sheet of plastic next to a 9 mm cartridge
14/16
A 9 mm hole in a sheet of plastic next to a 9 mm cartridge
The University of Illinois team behind the regenerative plastic
15/16
The University of Illinois team behind the regenerative plastic
A regenerative plastic developed at the University of Illinois seals up more than cracks
16/16
A regenerative plastic developed at the University of Illinois seals up more than cracks
View gallery - 16 images

Dropping your mobile phone can ruin your whole day as you look down at the spiderweb of cracks surrounding a small hole in the once-pristine plastic case. Now imagine watching as those cracks and that hole seal up by themselves, leaving behind a completely healed case. That may sound like science fiction, but it may not be for long with a team of researchers at the University of Illinois having developed a new system that doesn't just repair minor cracks in plastic, but regenerates to heal large holes.

Self-repairing materials have been around since engineers came up with fuel tanks in the Second World War that were designed to seal themselves when punctured by bullets and shrapnel. Since then, there have been compounds for car engines designed to stop leaks, and in recent years, plastics have been created that have the ability to heal themselves whether it’s through resin held in microcapsules or various patterns of capillaries that burst in response to damage to release healing agents that bleed into cracks, sealing and strengthening the area.

Such self-repairing plastics work, but they only have limited application. They can handle microscopic cracks, but not outright punctures that leave holes in a plastic panel. When this happens, there isn't enough resin to do the job or, more likely, it will just pour out of the hole.

The idea behind the regenerative plastic developed at the University of Illinois is to produce a system that can handle actual holes rather than just cracks by filling them with regenerative materials in a way similar to how living organisms heal themselves. It builds on the team’s previous work in creating fiber-reinforced composite materials with a network of microscopic veins by lacing them with fibers that disintegrate, leaving behind a sort of artificial bloodstream. In this case, it’s two parallel systems; each carrying a different liquid. When separated, they flow freely, but if the plastic is damaged, the capillaries open and the liquids react with one another to form a polymer gel that fills the gaps and hardens.

"Vascular delivery lets us deliver a large volume of healing agents – which, in turn, enables restoration of large damage zones," says Nancy Sottos, a professor of materials science and engineering. "The vascular approach also enables multiple restorations if the material is damaged more than once."

According to the team, the tricky bit in all this is taking into account the various factors, such as gravity, that can affect the flow and hardening. If the liquid gels too quickly, it just seals up the capillaries without repairing any cracks or holes. If it flows too freely, then it leaks away uselessly like trying to apply epoxy to a boat hull underwater. The team designed the sealant as a gel because it remains in place and builds on itself, filling the hole.

A 9 mm hole in a sheet of plastic next to a 9 mm cartridge
A 9 mm hole in a sheet of plastic next to a 9 mm cartridge

Another factor is control. Not all damage is the same and what will repair one sort of problem will be largely useless for another, so the team made the system controllable. By adjusting temperature and flow rate, the right amount of gel forms in the right place to fill holes or cracks. In tests, the regenerative plastic could “heal” holes simulating a 9 mm bullet hole.

The team is currently working on how to adapt the system to industrial applications in different plastic materials, saying that it could be used in everything from car bumpers to aerospace applications.

The team’s findings were published in the journal Science.

The video below outlines how the regenerative plastic works.

Source: University of Illinois

Regenerating Plastic Grows Back After Damage

View gallery - 16 images
4 comments
4 comments
P17
Great concept, but it's a little premature to claim that they've developed self-healing materials. The video demonstrates a highly controlled laboratory context. What they've done is demonstrate resin kinetics and capillary action. There's no evidence of the delivery system being even demonstrated in situ.
That's not to play down what they've done, but it's the usual American fever over very little.
Stephen N Russell
Saw this concept in 2008 movie Knight Rider when bullets hit KITT body would seal up bullet hits ( good FX for TV show then) on DVD. Best example of this tech
The Skud
Even only done in the lab, it is better than nothing! I wonder how they keep the outside edges from 'seeping' out and gradually growing a larger and larger sheet? Now if they can make it flexible, how about puncture-proofing car tires? Or making it optically neutral, for chip-proof windscreens?
BeckmanInstitute
You can check out the follow-up video about this research, with much more detail about how the regenerating plastic works, here...
http://youtu.be/uXOtQuwxNQI