If engineers at the University of California, Berkeley, have their way, "Power Dressing" could be back in vogue. However, instead of 80’s-style shoulder pads the engineers have been creating energy-scavenging nanofibers. These nano-sized generators could one day be woven into clothing and textiles to harness the energy created through normal body movements to power mobile electronic devices.
The piezoelectric properties of the nanofibers allow them to convert the mechanical energy created when they are stretched and twisted into electricity. And theoretically, the more vigorous the movements, the more power that is generated. Because the nanofibers are made from organic polyvinylidene fluoride, or PVDF, they are flexible and relatively easy and cheap to manufacture.
"And because the nanofibers are so small, we could weave them right into clothes with no perceptible change in comfort for the user," said Liwei Lin, UC Berkeley professor of mechanical engineering and head of the international research team that developed the fiber nanogenerators.
The goal of harvesting energy from mechanical movements through wearable nanogenerators is not new. Other research teams have previously made nanogenerators out of inorganic semiconducting materials, such as zinc oxide or barium titanate. However, inorganic nanogenerators are more brittle and harder to grow in significant quantities.
The tiny nanogenerators have diameters as small as 500 nanometers, or about 100 times thinner than a human hair and one-tenth the width of common cloth fibers. The researchers repeatedly tugged and tweaked the nanofibers, generating electrical outputs ranging from 5 to 30 millivolts and 0.5 to 3 nanoamps. The researchers reported no noticeable degradation after stretching and releasing the nanofibers for 100 minutes at a frequency of 0.5 hertz (cycles per second).
Lin's team at UC Berkeley pioneered the near-field electrospinning technique used to create and position the polymeric nanogenerators 50 micrometers apart in a grid pattern. The technology enables greater control of the placement of the nanofibers onto a surface, allowing researchers to properly align the fiber nanogenerators so that positive and negative poles are on opposite ends, similar to the poles on a battery. Without this control, the researchers explained, the negative and positive poles might cancel each other out and reducing energy efficiency.
The researchers demonstrated energy conversion efficiencies as high as 21.8 percent, with an average of 12.5 percent.
“Surprisingly, the energy efficiency ratings of the nanofibers are much greater than the 0.5 to 4 percent achieved in typical power generators made from experimental piezoelectric PVDF thin films, and the 6.8 percent in nanogenerators made from zinc oxide fine wires,” said the study's lead author, Chieh Chang
"We think the efficiency likely could be raised further," Lin said. "For our preliminary results, we see a trend that the smaller the fiber we have, the better the energy efficiency. We don't know what the limit is."
The fiber nanogenerators are described in this month's issue of Nano Letters.
Now, saying that, the one piece of clothing that can have more regular wear schedule is shoes... and these get LOTS of mechanical forces applied. Perhaps an insole insert nano-generator could be worn between shoes, and the electricty applied to ... ?? what piece of critical gear are these nano-generators trying to power exactly ??