Automotive

CPT's auto exhaust gas energy recovery system

View 4 Images
An early version of TIGERS on test
Liquid cooled version of TIGERS
Air cooled version of CPT turbo-generator integrated gas energy recovery system
View gallery - 4 images

A lot of energy has traditionally been flushed down the exhaust pipe of the internal combustion engine and it's interesting to see that a number of companies, most notably BMW and Toyota until now, have been working on harvesting that power thanks to the imperatives of the energy crisis. Now Controlled Power Technologies (CPT), best known for its VTES electric supercharger, is working on exhaust gas energy recovery too. CPT estimates it will take five years to bring its research to market.

CPT’s Turbo-generator Integrated Gas Energy Recovery System (TIGERS) uses the same switched reluctance technology as its production-ready VTES electric supercharging and SpeedStart stop-start systems, though both of those systems are developed to the stage of commercialization. CPT estimates it will take five years to bring TIGERS to market.

VIPER research project

TIGERS is now being added to UK’s Technology Strategy Board's “Vehicle Integrated Powertrain Energy Recovery“ (VIPER) research project, run by the UK’s Technology Strategy Board. The VIPER project will build on CPT’s involvement in the Ricardo-led "HyBoost" program, which is similarly part funded by the TSB.The new VIPER project aims to show how a reduction in CO2 emissions of 4.5 per cent can be achieved over a broad range of vehicles in part by optimizing the control of heat energy from conventional gasoline and diesel engines. The project is being led by Jaguar Land Rover with consortium members including Ford, IAV, BP, University of Nottingham and Imperial College London.

The Technology Strategy Board (TSB) anticipates that VIPER technologies could be applied to the majority of new vehicles before the turn of the decade, though it will be interesting to see what percentage of the vehicles on our roads still contain an internal combustion engine a decade from now.

Several factors are expected decrease supply and increase demand of oil, hence oil prices are almost certain to be astronomically expensive by then thanks to the anticipated growth of car sales in developing superpowers such as China, India, Russia and Brazil.

“The VIPER project builds on our exhaust gas energy recovery work already underway for the HyBoost programme,” says CPT engineering director Guy Morris. “HyBoost also includes our VTES electric supercharger. There’s enormous synergy in the integration of these and other micro-hybrid technologies such as SpeedStart; the mild electrification of gasoline and diesel engines can produce highly efficient vehicles able to achieve significant fuel savings with CO2 emissions of less than 95g/km for the average family saloon.”

View gallery - 4 images
  • Facebook
  • Twitter
  • Flipboard
  • LinkedIn
2 comments
The Mechtician
This device is suspiciously similar to Turbodyne\'s Dynacharger, which was announced with much fanfare around 5 years ago. I like the Dynacharger concept a lot, since it could not only generate electricity but use the electric armature as a regenerative brake to control turbine speed and therefore boost pressure. It appears that CPT has eliminated the compressor from the turbine, which negates that particular performance aspect, but still exciting nonetheless. It is my understanding that Turbodyne abandoned the project, I wish CPT greater luck with their system.
ChgoSTrider
Using the exhaust stream to produce power is not a new concept. The Wright R-3350 used turbines in its exhaust system to capture and feed power to the engine crankshaft. There were a lot teething troubles. While the airlines used them they went to the jets as soon as they became available and dumped the T/C as quick as they could. Maintenance costs and engine failures were cost killers.
Turbines run best when run at a constant, high speed. Automobile engines run at varying, generally light loads. Is this arrangement going to recover enough power to be cost effective?