Home Entertainment

Prototype TV ditches the plug and powers up wirelessly

View 2 Images
Reasonance believes it has the ticket to TVs that don't need to plug directly into the wall
Reasonance
Reasonance believes it has the ticket to TVs that don't need to plug directly into the wall
Reasonance
The Reasonance coils replace the wire
Reasonance

Usually when we talk about "cutting the cord," it means disconnecting the cable or satellite feed from the TV and streaming content over Wi-Fi. But Russian startup Reasonance has bigger plans for TV cord cutting. The wireless TV prototype it showed at CES 2021 leaves the electrical cord behind in favor of a wireless power transmission and reception system.

TVs have been getting thinner and lighter for decades, able to stand or mount virtually anywhere. But those pesky wires are still holding them back. They look unsightly when dangling down from the a wall-mounted screen and create issues when attempting to place the TV too far from an electrical outlet.

Could wireless transmission be the answer? Not yet, but Reasonance is working on it. The company's wireless TV loses the power plug and gains a standalone electrical transmitter and a receiver coil integrated into the TV. The company explains that its "reasonance" technology differs from other magnetic resonance tech in developing a magnetic field by both conduction and displacement currents. It says that efficiency rises up to 90 percent, at a cost affordable enough to use in consumer electronics.

Reasonance's system can send power over distances up to a meter (3.3 ft) and can continue to operate efficiently even if the transmitter and receiver coils are not perfectly aligned. The company says the transmission distance could be increased by adjusting the size of the coils.

The Reasonance coils replace the wire
Reasonance

The CES prototype has an external receiver coil on the back of a 40-in TV. The company says the coil could also be integrated into the TV frame itself, though the current coil would bloat the sleek flat-panel construction. The transmitter coil is set on a table just below, off-centered and perpendicular in relation to the TV, and Reasonance says that it could also be placed inside a wall or a piece of furniture without interfering with operation. The system transmits 120 watts of power at a frequency of 20 to 120 kHz over a distance of 20 in (50 cm).

Reasonance isn't the first to research the idea of wireless TV. In fact, Samsung, the world's largest television manufacturer, had originally planned to bring its own wireless TV to last year's CES but ultimately decided the tech wasn't ready. Jong-Hee Han, Samsung's president of Visual Display, cited poor efficiency among other issues as the reason it left the TV back at the lab, South Korea's Yonhap News Agency reported at the time.

Reasonance believes its tech solves efficiency and cost issues to the point that it could be integrated into marketable products. It has patented the tech in Russia and applied for patents in the US, EU, China, India, Canada and South Korea. It intends to license its technology to existing manufacturers, as opposed to building its own products, citing a wide range of potential applications beyond TVs, from appliances and electric bikes at home to electric automobiles and smart roads.

The short video clip below doesn't go into too much detail, but it does provide a closer view of the hardware than the photos.

Source: Reasonance

  • Facebook
  • Twitter
  • Flipboard
  • LinkedIn
4 comments
DoctorDee
Power cords "create issues when attempting to place the TV too far from an electrical outlet"
So here's a TV that has to be placed less than a meter from something that has to by connected to a power outlet.
BRILLIANT.
Brian M
Its not just power cable- there is the HDMI cable from the games console, the Blu-ray, the ancient video recorder, oh and the old stalwart of TV connections the UHF antenna or satellite, and in my case a wired internet connection as WiFi just doesn't hack it for streaming!

Although guess these could be solved using a two part TV of a control/input box and display with a single high performance wireless link to the display from the control/input box. Might even reduce the power requirement for the wall mounted component.
Username
Remove unsightly wire and replace with a monstrosity behind and to the side. Huh?
paul314
If you have enough money for this kind of contraption, you almost certainly have enough for the custom support pedestal and in-wall power and signal lines needed to make the cords "invisible" without hundreds of watts of stray RF.