Bicycles

RideAir takes the hard work out of roadside bike tire-pumping

View 3 Images
RideAir is a portable compressed air pump, that fills bicycle tires with the press of a button (Photo: DesignAir Innovations)
RideAir features a dial gauge that shows how much air is left inside it (Photo: DesignAir Innovations)
RideAir is a portable compressed air pump, that fills bicycle tires with the press of a button (Photo: DesignAir Innovations)
Users just attach RideAir to their tire's valve stem (Photo: DesignAir Innovations)
View gallery - 3 images

When it comes to inflating bike tires on the road, there are two options: a compact hand pump that requires some exertion, or a single-use CO2 cartridge. New York-based DesignAir Innovations, however, has created another one. It's called RideAir, and it's refillable portable compressed air pump.

You start by charging the RideAir via its inlet valve, using a powered air compressor at a gas station, bike shop or elsewhere. You can also use your own manual bicycle floor pump at home. Its 650-mL (22-oz) aluminum air tank can hold up to 300 psi (21 bar), with a built-in dial gauge displaying its current pressure. You then stick it in your backpack, or in a standard-size water bottle bottle cage.

Should you subsequently discover that one of your tires is a bit soft – either from natural seepage or from a slow leak – you just pull over, pull out the RideAir's inflation tube, attach it to the tire's valve stem, then hold down the inflate button until the tire is firm. It's Schrader valve-ready, and comes with a Presta valve adapter.

Users just attach RideAir to their tire's valve stem (Photo: DesignAir Innovations)

No hand-pumping is required, and it can fill a completely flat tire within seconds. Once you've used up its current compressed air supply (which should be good for at least a couple of tire-inflations), you just fill it up again.

The device is waterproof, weighs about one pound (0.5 kg), and additionally features a 4-foot (1.2-m) combination cable lock built into the bottom to keep both it and your bike secured when left unattended.

While it certainly looks like less work than a hand pump, and is reusable unlike a CO2 cartridge, it's definitely a little on the big side – particularly for something you hopefully won't need to use very often. DesignAir states that it could also be utilized for tasks such as inflating sports equipment and inflatable toys, which does add to its value.

The RideAir is currently the subject of a Kickstarter campaign, with a pledge of US$45 getting you one when and if they reach production. The planned retail price is $70.

You can see it in use, in the video below.

Sources: RideAir, Kickstarter

View gallery - 3 images
  • Facebook
  • Twitter
  • Flipboard
  • LinkedIn
4 comments
LiranErez
Awesome :)
Freyr Gunnar
I find this useless: It's much bigger than compact, high-performance mini-pumps like the Topeak Road Morph G, which actually takes very little exertion to pump a tire back to the right pressure, even at 8 bars/116 PSI. And the RideAir is not even cheaper.
Besides, good quality tubes don't need to be refilled more than once every month.
John2001
Why would they call it a pump in the video when it is clearly just a small air tank?
Paul Anthony
This would be useful and economical in a factory automation environment. Often times a high pressure local tank is needed on a cylinder. Typical cost now is 300+ dollars.