Marine

HydroJet adds a jet drive to existing paddleboards and kayaks

View 4 Images
The HydroJet is presently on Kickstarter
HydroJet
Plans call for the final version of the HydroJet to have a HIPS (high impact polystyrene) body, along with the existing stainless steel jet drive inside – the current model has a carbon fiber wrap on the outside
HydroJet
The HydroJet remote is IP68 waterproof, meaning it can be submerged down to 1.5 m (5 ft) for 30 minutes without leaking
HydroJet
The HydroJet is presently on Kickstarter
HydroJet
The HydroJet works in both fresh and salt water
HydroJet
View gallery - 4 images

Although one of the big appeals of paddleboards and kayaks is the fact that they are human-powered, there are some scenarios in which a motor could help. The HydroJet was designed with that fact in mind, as it can be mounted on existing watercraft as needed.

Designed by a Portland, Oregon-based team of watersports enthusiasts, the 34-lb (15-kg) device incorporates a single water-cooled electric jet drive motor. Previous prototypes featured two such motors – one on either side of the board/kayak – but they were found to create too much drag, and use too much battery power.

The current version of the HydroJet is fastened to the rear of the user's watercraft via a proprietary strapping system. It's then controlled by an included wireless handheld remote, delivering a top speed of over 17 mph (27 km/h). One charge of the removable 44,000-mAh lithium-ion battery pack is claimed to be good for up to 80 minutes of runtime.

The HydroJet works in both fresh and salt water
HydroJet

The remote is IP68 waterproof, meaning it can be submerged down to 1.5 m (5 ft) for 30 minutes without leaking. If the user should fall off their board and into the water, the HydroJet will stop as soon as their thumb releases the remote's throttle switch.

Steering is managed by shifting one's body weight and/or using a paddle.

Plans call for the final version of the HydroJet to have a HIPS (high impact polystyrene) body, along with the existing stainless steel jet drive inside – the current model has a carbon fiber wrap on the outside
HydroJet

Should you be interested, the HydroJet is currently the subject of a Kickstarter campaign. Assuming it reaches production, a pledge of US$1,100 will get you one – we're told that the retail price will be in the range of $1,300 to $1,400. It can be seen in action, in the video below.

Paddleboarders and kayakers who are interested in adding an electric propeller-drive motor to their craft might also want to check out the ElectraFin and the PacMotor, respectively.

Read more...

Source: Kickstarter

View gallery - 4 images
  • Facebook
  • Twitter
  • Flipboard
  • LinkedIn
3 comments
Expanded Viewpoint
Pretty cool concept there, but nothing is said about how long it takes to recharge the battery pack or if it's removable or how easy/expensive it will be to replace when worn out. Why buy an expensive toy like that, if you can't use it after a couple of years? Or is the customer expected to just throw it into a landfill and buy another one at three or more times the cost of the first one? ALL of these E-bikes, cars, trucks, airplanes share the exact same problems, no one is addressing those problems, and so we will NEVER see them making any big inroads with the transportation of goods and people. Four E-car makers just cut their production number predictions in HALF!!!
ljaques
A bit too expensive at 5x the price of the inflatable board, but a great idea.
Evil empires
Great... a kooktraption for the kook inflatable SUPs and the kooks riding them. 34lbs. It weighs more than the board.. Ha Ha.
Buy a hard board and don't buy this jet. Looks ridiculous... kook bait 100%