Marine

Yamaha's world-first hydrogen outboard unveiled on prototype boat

View 12 Images
Yamaha's prototype hydrogen outboard and vessel on show at MIBS 2024
Yamaha
The trio of compressed hydrogen tanks takes up a lot of hull space
Yamaha
Yamaha previously said it would be showing a hydrogen outboard, but it didn't say it would be fully integrated with a boat and fuel delivery system
Yamaha
Yamaha's H2 V8 gets fueled by a compressed hydrogen system developed by Roush
Yamaha
Yamaha, Roush and Regulator Marine show a first-of-its-kind hydrogen-combustion boat prototype at MIBS 2024
Yamaha
Cover off
Yamaha
Roush works on assembling the compressed H2 system
Yamaha
Diagramming the build
Yamaha
Working on H2 prototype parts
Yamaha
Regulator worked closely with Roush, adjusting the structure of the boat hull around the storage demands for the compressed hydrogen
Yamaha
Yamaha prototype H2 engine with Roush prototype fuel system
Yamaha
The prototype hydrogen boat coming together
Yamaha
Yamaha's prototype hydrogen outboard and vessel on show at MIBS 2024
Yamaha
View gallery - 12 images

Yamaha previously announced it would show its prototype hydrogen-combustion outboard motor at the 2024 Miami International Boat Show, and it's gone the extra mile in bringing a prototype boat and fuel delivery system to go along with it. Yamaha calls its new hydrogen V8 outboard a world first for the recreational boating industry and has partnered up with Roush and Regulator Marine to install it into a working boat that will begin testing in a few months.

In developing its hydrogen outboard prototype, Yamaha adapted the technology it has used for land-based hydrogen combustion engines, including the one it installed on the Drive H2 golf cart concept revealed last month at the PGA Show. In this case, it created a hydrogen version of its flagship XTO outboard, an offshore V8 offering 425- and 450-hp ratings, the most powerful in Yamaha's outboard lineup. Yamaha has not released output specs for the hydrogen version, so we're not sure how close it comes to joining the gas XTO at the top of the Yamaha outboard family.

Building a combustion engine that can run on hydrogen is but one part of the equation; another major challenge is figuring out how to store and run the H2 to fuel it. For this aspect of the project, Yamaha turned to the experts at Roush for help.

The Roush name rings familiar to us primarily from its performance automotive division and Ford Mustang models and components, but the greater company includes engineering and clean tech arms that work in a wide variety of industries, from mobility and aerospace, to energy and defense. It has decades of experience working with hydrogen power systems across various sectors.

Yamaha prototype H2 engine with Roush prototype fuel system
Yamaha

“When you look at Roush’s history with hydrogen, it ranges from land speed record vehicles to spacecraft," explains Matt Van Benschoten, vice president of advanced engineering at Roush. "A lot of that knowledge we’ve acquired over the years, we are now applying directly to this Yamaha project. We are the fuel systems integrator, responsible for fuel systems designs, all of the specifications development, physical integration, safety system analysis, as well as testing and development. Yamaha is trying to determine if hydrogen can successfully be used in this market, and I think we will find out the answer is 'yes.'"

Roush works on assembling the compressed H2 system
Yamaha

Roush worked closely with boatbuilder Regulator Marine in integrating its fuel system into the prototype boat. Regulator started out with the 26.8-foot (8.2-m) hull from its 26XO sport fishing boat, immediately redesigning around the very different storage requirements of hydrogen versus gas.

Since the boat is designed to be a working prototype and testbed, not merely an exhibition vehicle, Regulator's work wasn't always simple. It had to relocate bulkheads and other critical elements around the large compressed-hydrogen tanks to ensure full structural integrity. The tanks sit low and centrally and take up a lot of space that would ordinarily be assigned to components like the center console, fish box and marine head.

The prototype hydrogen boat coming together
Yamaha

Yamaha, Roush and Regulator plan to begin testing of the prototype boat this summer (Northern Hemisphere). All three are keen to test the viability of a hydrogen combustion system in the marine environment with an eye toward the future of boating.

"If we don’t look for a new source, we won’t find a new source," sums up Joan Maxwell, president of Regulator. "Innovation starts by asking questions. In the future, as we design boats, if this proves what we think it will, it could be very possible that we are designing hulls around these hydrogen fuel tanks."

Cover off
Yamaha

For its part, Yamaha has committed to pursuing a multi-solution approach to decarbonization in recreational boating. It's hit the ground running this year in accordance with that multi-source plan, the hydrogen prototype following on the heels of its announcement last month of intent to acquire German electric propulsion specialist Torqeedo. It hopes to lead the way in marine hydrogen development while encouraging competitors to proceed with H2 plans of their own and contribute to the greater marine hydrogen ecosystem.

The Miami boat show kicked off on Wednesday and runs through Sunday, February 18.

Source: Yamaha

View gallery - 12 images
  • Facebook
  • Twitter
  • Flipboard
  • LinkedIn
1 comment
FME III
"Yamaha is trying to determine if hydrogen can successfully be used in this market, and I think we will find out the answer is 'yes.'"

I think the answer will be "no." Michael Barnard at Cleantechnica shows why the economics of hydrogen for something like an outboard motor will never pencil out. https://cleantechnica.com/2024/02/12/the-life-story-of-a-committed-hydrogen-for-energy-worker-unfolds/.