Science

Scientists create "spray-on graphene"

Researchers have devised a method of spraying graphene onto a wide variety of surfaces (Image: Shutterstock)
Researchers have devised a method of spraying graphene onto a wide variety of surfaces (Image: Shutterstock)

Despite its many desirable qualities and potential applications, graphene still isn't as widely used as it could be for one main reason – it's difficult to apply to surfaces, particularly large ones. Attempting to do so often causes damage to the graphene, or otherwise results in a non-uniform, flawed coating. Now, however, scientists have devised a method of simply spraying the stuff on, that actually improves the graphene in the process.

Prof. Sam S. Yoon at Korea University had already been working on a kinetic spray deposition system, that could apply liquids to a variety of materials by accelerating droplets to supersonic speeds via a de Laval nozzle. He was approached by the University of Illinois at Chicago's Prof. Alexander Yarin, who believed that the technology could be used for the application of graphene flakes suspended in a carrier liquid.

The result of their collaboration is a system that reportedly applies graphene to various substrates in a smooth, even layer. The liquid evaporates quickly, leaving behind a coating of well-distributed flakes that resist clumping together, but that also don't have any large empty spaces between them.

While the relatively flawless overall coating was what the scientists had been hoping for, they were surprised to discover that the deposition process also corrected flaws already present in the individual flakes. This was likely due to the fact that the "imperfect" graphene was forced to stretch out in all directions as it hit the substrate at supersonic speed, its linked carbon atoms subsequently defaulting back to a more uniform, hexagonal alignment with one another.

According to Yarin, the new process is "simple, inexpensive, and can be performed on any substrate with no need for post-treatment."

A paper on the research was recently published in the journal Advanced Functional Materials. Scientists at MIT and the University of Michigan are developing another graphene deposition technique, that involves the application and subsequent removal of metal foil to the substrate.

Source: University of Illinois at Chicago

  • Facebook
  • Twitter
  • Flipboard
  • LinkedIn
9 comments
Nairda
Would be interested to see the properties of the preyed on vs other processes.
My other thoughts are, can it be layered. ie, wait for coat to dry then repeat, or would this not create a second layer?
VirtualGathis
@Nairda - I suspect it would not as the reason this works is due to the sheets being forced to self align due to the energy of their delivery.
Combining this with the easy shearing method of adding detergent and graphite to a shearing mixer would create a simple end-to-end process that could easily scale up. This could be the beginning of industrial scale graphene.
Gregg Eshelman
When will it be available in a spray can, like currently available spray on dry graphite lube?
Is this graphene coating durable? Does it reduce friction?
Gary Richardson
Is there any control over the orientation of the grapheme deposition? Graphene's conductive properties rely on edge orientation (armchair vs. zig-zag) in order to have ballistic conduction. Perhaps magnetic fields would guide the spray polarity or surface boundaries serve as starting points to dictate lay out orientation.
esar
I wonder if you could make a ribbon microphone that won't break with this method?
Slowburn
If I spray the inside of an aluminized Mylar gas bag with it will the gas bag hold hydrogen long term?
Antony Innit
would it work to keep hair straight?
Andrew Zuckerman
Can I make an un breakable condom?
Douglas Bennett Rogers
Haven't heard about this for awhile.