Graphene-based supercapacitor hits new energy storage high

Graphene-based supercapacitor ...
High surface area of graphene make supercapcitors possible
High surface area of graphene make supercapcitors possible
View 2 Images
Capacitors with energy densities comparable to Ni-mh batteries
Capacitors with energy densities comparable to Ni-mh batteries
High surface area of graphene make supercapcitors possible
High surface area of graphene make supercapcitors possible

A breakthrough in supercapacitor performance has been achieved with the development of a device that can store as much energy as a battery while recharging in seconds. The graphene-based supercapacitor being developed in the U.S. by researchers at Nanotek Instruments can store as much energy per unit mass as nickel metal hydride batteries and could one day be used to help deliver almost instant charging to recharge mobile phones, digital cameras or micro electric vehicles.

With the high surface area of their electrodes and an extremely narrow gap between the electrodes, supercapacitors, also known as electric double-layer capacitors or electrochemical capacitors, can store a large amount of electrical charge in a tiny volume. The newly developed device has electrodes made graphene mixed with an acetylene black called Super P that acts as a conductive additive and a binder that holds it all together. The resulting slurry is coated onto the surface of a current collector and assembled in coin-sized capacitors. The electrolyte-electrode interface is made of "Celguard-3501" and the electrolyte is a chemical called EMIMBF4.

Specific energy density of the new capacitor (a measure of how much electricity can be stored per weight) has been measured at 85.6 Wh/kg at room temperature and 136 Wh/kg at 80 degrees Celsius (176 F), which is comparable to Ni-mh batteries. These are the best values for electric double layer supercapacitors based on carbon nanomaterials recorded to date.

"This new technology makes for an energy storage device that stores nearly as much energy as in a battery but which can be recharged in seconds or minutes," Jang said. "We believe that this is truly a breakthrough in energy technology."

The team, which includes scientists from Angstron Materials in the U.S. and Dalian University of Technology in China, is now trying to further improve the energy density of the device.

"Our goal is to make a supercapacitor that stores as much energy as the best lithium-ion batteries (for the same weight) but which can still be recharged in less than two minutes," Jang said. "Despite the theoretically high specific surface area of single-layer graphene (which can reach up to 2.675 m2/g), a supercapacitance of 550 F/g has not been reached in a real device because the graphene sheets tend to re-stack together. We are trying to overcome this problem by developing a strategy that prevents the graphene sheets from sticking to each other face-to-face. This can be achieved if curved graphene sheets are used instead of flat ones."

The team's work was reported in Nano Letters.

Rich Mansfield
To keep the plates from sticking to each other, why not use the TVM (tobacco virus) technology the other guys are using to make their batteries better? They\'re tiny, they\'re programmable, they stack.
Gregg Eshelman
Or just wad the sheets into little balls, as seen in another article on Gizmag.
Sooo, when will we see a $5 ultra capacitor capable of holding and discharging enough power to make a cheap quartershrinker? ;)