MILA Concept car: single seater for the road powered by natural gas

MILA Concept car: single seater for the road powered by natural gas
View 11 Images
View gallery - 11 images

September 20, 2005 Magna Steyr has unveiled a new concept vehicle at the IAA 2005. Called the "MILA Concept" (Magna Innovation Lightweight Auto), the single-seater sports car has a mid-engine and rear-wheel drive and is packed with ideas and innovations. The MILA’s technical highlights include an cco-friendly engine that runs on CNG (Compressed Natural Gas) and thanks to the extremely lightweight monocoque construction, offers extremely sporty performance.

Given Magna Steyr’s automotive production expertise, the car has been designed using modular design principles that enable different models to be built (single or two-seater, normal or high-power engine, etc.) without much extra effort, as the components and modules have been developed in advance and optimised in terms of cost and weight.

Magna Steyr is confident that natural gas will gain more and more ground as an alternative fuel for road vehicles in the future. A study by the German Automotive Industry Association published in Frankfurt recently came to the conclusion that in Germany alone some two million natural gas vehicles will be licensed in the next 15 years. According to the study, natural gas vehicles could reach a market share of around 4% by the year 2020.

CNG is available today in sufficient quantities and has many advantages over automotive gas (i.e. butane or propane). It provides, for example, higher antiknock quality and only has to be cleaned, filtered and dried before use, while automotive gas can only be obtained using complex refinery processes.

Engines reach a higher degree of efficiency with CNG than with gasoline (up to 32% compared with 25%). What’s more, under the stringent Californian emission legislation of 2004, a CNG vehicle belongs to the eco-friendly AT-PZEV category (Advanced Technology Partial Zero Emission Vehicle).

Irrespective of the MILA Concept, which is an initial important step in the right direction, Magna Steyr will focus more on the development of natural gas engines in the future. Here the company’s engineers will benefit from Magna Steyr’s long-standing experience in the field and specific technical expertise in the development and manufacture of fuel tanks and fuelling systems.

The engine used in the MILA Concept, installed in the rear as a mid-engine, is a standard 1.6-litre four-cylinder model that was converted to monovalent CNG operation, which means it will run on natural gas alone. Apart from installing CNG-specific injection valves, no other modifications had to be carried on the original gasoline engine. Its maximum power of 110 kW (150 hp) gives the concept vehicle a top speed of over 200 km/h and acceleration from 0 to 100 km/h in 6.9 seconds.

The fuel tank is a composite CNG safety pressure cylinder (aluminium liner wrapped with carbon fibre) and located safely behind the driver’s seat should there be a crash. In the version on show at the IAA, the tank volume is 76 litres, which gives the vehicle a driving range of around 200 km at any one time.

The attractive, Class-A stampings made of glass-reinforced polyester designed by the Magna Steyr Styling Department conceal an ultramodern, extra light and extra stiff space frame in 6000 series aluminium alloy – weighing only around 100 kg. The entire chassis is a lightweight construction made of high-strength steel. Given the consistent lightweight design throughout, the complete vehicle weighs in at around 850 kg.

The current version of the MILA Concept experimental vehicle has a closed body with a Perspex bubble over the driver. If the vehicle goes into volume production at a later date, a three-part bubble made of laminated glass would be conceivable instead of the Plexiglas one.

Since a basic principle in Magna Steyr’s corporate strategy is not to market any vehicles of its own, the MILA Concept does not involve any plans or proposals to build a vehicle under the Magna Steyr brand. In fact, the company is seeking an OEM as a partner in the promising MILA Concept project with a view to jointly turning it into a production mature and marketable vehicle. Magna Steyr estimates the time required for production development to be about 23 months.

Studies have revealed that there are definitely market opportunities for a vehicle of the MILA Concept type. Potential customers range from:

    Individualists, techies and lifestylers with a penchant for innovative, original, pioneering vehiclesDrivers who are looking for a vehicle using eco-friendly alternative fuels that they can drive in built-up areas, even when environmental regulations close city centres to private traffic (e.g. ban on driving because of particulate emissions)Fresh-air aficionados who don’t really want to miss the feeling of riding a motorcycle, but still prefer to drive on four wheels (perhaps only because they don’t have a motorcycle licence) with a roof over their heads if need bePotential buyers who already have one or two conventional vehicles in the family and are therefore interested in something “completely different” as a second or third car – a vehicle with a hint of Formula One fascination, a funky fun car with a sporty look, power and performance but at an affordable price.
View gallery - 11 images
No comments
There are no comments. Be the first!