Aircraft

Switchblade flying car gets production redesign after first flight

View 4 Images
The design for the sleeker and easier-to-build production version of the Switchblade
Samson Sky
The current prototype version of the Switchblade, which made the flight last year
Samson Sky
The production version of the Switchblade in ground mode
Samson Sky
The planned interior of the Switchblade – a pilot's license will be required to fly it
Samson Sky
The design for the sleeker and easier-to-build production version of the Switchblade
Samson Sky
View gallery - 4 images

It was just a year ago that the Switchblade flying car made its first actual flight, moving one step closer to real-world usage. Based on what was learned in the course of that flight, its makers have now unveiled the design for the production version of the vehicle.

Should you be unfamiliar with the Switchblade, it's a fixed-wing flying car being developed for the civilian market by Oregon aviation company Samson Sky.

In ground mode, the three-wheeled two-seater moves along the road much like any other car, with its wings folded in beneath its body, and its tail folded into the rear. The prototype is already capable of reaching the targeted top ground speed of 125 mph (201 km/h).

Upon reaching an airport or airstrip, the Switchblade switches into flight mode. As you might have guessed, this involves folding out its wings and extending its tail. The whole process takes just three minutes.

The current prototype version of the Switchblade, which made the flight last year
Samson Sky

The idea is that the vehicle will then take off and fly to another runway near its destination, just like a regular small private plane. Its hybrid power system runs on regular 91-octane gasoline, and should ultimately deliver up to 500 miles (805 km) of range from a full 36-gallon (125-l) fuel tank.

Upon landing at the destination runway, the Switchblade will retract its wings and tail, then proceed to the precise destination via the ground.

Last November, at the Grant Country International Airport in Moses Lake, Washington, the prototype made its first flight. The aircraft reached an altitude of 500 ft (152 m), and circled the area for six minutes before landing back at the airport. Plans call for it to be capable of attaining an altitude of 13,000 ft (3,962 m).

That brings us to the new design, which was guided by the performance of that test vehicle.

The production version of the Switchblade in ground mode
Samson Sky

Most notably, the Switchblade's two rear thruster propellers now fold into the body when not in use – they were previously hard-mounted in scoops on the sides of the vehicle. According to Samson Sky, wind tunnel tests show that this and other streamlining measures should allow the aircraft to reach its targeted 160-mph (257-km/h) cruising airspeed.

The new design is also intended to make the Switchblade easier to build. This is an important consideration, as the company claims to already have approximately 2,300 reservations from buyers in 57 countries. Pricing should start at US$170,000 a pop.

"Everything we do is with the mindset of how we are going to produce thousands of Switchblades, to meet the incredible demand we have," says Samson Sky CEO, Sam Bousfield.

The company is now in the process of building three new prototypes, which will be subjected to both air and ground testing over the next 18 months.

You can see the folding mechanism of the latest design in the video below.

Source: Samson Sky

View gallery - 4 images
  • Facebook
  • Twitter
  • Flipboard
  • LinkedIn
7 comments
pete-y
That is a snazzy mechanism just hope nothing tangles with it.
Want one!!
Joe123
Does anyone remember Jim Bede? He was one of the biggest con artists in the sport aviation industry. He is no longer the biggest. Anyone with any aeronautical sense will look at this and laugh their ass off! When you put a beautiful shiny object in front of someone that knows nothing about the aviation industry, you have people waiting in line with a fist full of money lusting after it. Did everyone forget about the Terrafugia? BD10? Look what happened to the Icon. Roadable aircraft make bad airplanes and bad cars. If you don't want to lose money, stick with a nice Cessna or Piper, or build a kit from a respectible company like Zenith or RV.
Username
Make sure to get us video of the actual car when released!
Nelson
Why won't the flying car fntasy ever die? It is a fantasy that is useless and impractical to ever really exist.
Godstrike
So ugly.
Aermaco
Joe,, jim Bede was not a conman or bad aeronautical engineer his BD5 versions were successful aircraft and beautifully logical and not the dead end of road able aircraft.
TomLeeM
I think it is neat (and an even better design) when the tail is protected when in street mode. It looks even cooler. In flight mode with the tail out, it looks like it got rear ended by a drone. I look forward to see it on the roads. I think what would make it even cooler if it was in a James Bond movie or other spy or science fiction movie. It would be a great promotion for it. I doubt I would ever be able to afford one but I am hoping to see one on the road or in the sky above.