The Fujifilm X-T10 is the latest addition to the X-series line-up, and a little sibling to the high-end Fujifilm X-T1. As such the new mirrorless camera has a lot in common with its bigger brother, including a 16.3 megapixel X-Trans CMOS II sensor, a 2.36 million-dot OLED electronic viewfinder and the recently announced new autofocus modes. However, to reduce the intimidation factor for less experienced photographers, the camera is smaller and more accessible, with an Auto Mode Switch lever for accessing the fully-automatic Advanced SR Auto mode.
The core photographic specification of the Fujifilm X-T10 may well look familiar to those who have previously looked at the X-T1. A 16.3-megapixel APS-C (23.6 x 15.6 mm) X-Trans CMOS II sensor is paired with an EXR Processor II. This allows a wide ISO range up to an extended ISO 51,200 and burst speed shooting at 8 frames per second (fps) for approximately eight JPEG frames. While that top speed matches the X-T1 it's worth noting that the higher-end camera has a bigger buffer and can maintain this speed for 47 frames.
Autofocus is dealt with by a hybrid system which combines contrast and phase detection points to achieve fast and accurate focusing. Out-of-the-box the camera offers the standard 49-point Single Point mode along with the new Zone and Wide/Tracking modes that use a larger 77-point area when shooting moving subjects, which were recently announced for the X-T1 in an upcoming firmware update. It also has Eye Detection AF and an Auto Macro mode. Full HD 1080p video recording is possible at 60/50/30/25/24 fps, and a high bit rate of 36Mbps enables high quality footage.
Physically the X-T10 keeps the stylish retro look of the X-T1, but is smaller and lighter. It comes in at 118.4 x 82.8 x 40.8 mm (4.7 x 3.3 x 1.6 in) and weighs 381 g (13.4 oz) with a battery and memory card, but without a Fujifilm X mount lens attached. Around back there's a 0.39-in 2.36 million-dot OLED electronic viewfinder which allows the composition of images even in bright conditions, has a quick response time with a lag of just 0.005 seconds, and can display the effects of settings as you are shooting. Under this is a tilting three-inch LCD monitor with 920K-dots.
As we've come to expect from Fujifilm X-series cameras, there are plenty of physical controls and dials and to keep advanced photographers happy, though the X-T10 only has three top dials to the five of the X-T1. However, in a bid to be more accessible than the model it's based on, there's also an Auto Mode Switch lever on the top of the camera which can be used to quickly shift into a fully-automatic Advanced SR Auto mode for easy shooting. Here the camera will choose the optimum settings from 58 preset scenes. Another big change from the X-T1 is the inclusion of a pop-up flash.
The new camera also features built-in Wi-Fi connectivity for sharing images and video, or using a smart device running the Fujifilm Camera Remote app to remotely focus using a live display and "Touch AF" and then trigger the camera release. For those who like to process their images in-camera, there are a number of film simulation options, as well as the usual array of filters.
The Fujifilm X-T10 is expected to be available in silver or black from June, and will cost US$800 body-only.
You can check out a promo video for the X-T10 below.
Product page: Fujifilm X-T10