Around The Home

Siemens full-surface induction cooktop lets you arrange the pans wherever you like

Siemens full-surface induction cooktop lets you arrange the pans wherever you like
Siemens' full-surface induction cooktop allows up to four pieces of cookware to be placed anywhere on its surface
Siemens' full-surface induction cooktop allows up to four pieces of cookware to be placed anywhere on its surface
View 4 Images
Siemens offers its full-surface induction cooktop in surface-mounted (pictured) and flush-mounted versions
1/4
Siemens offers its full-surface induction cooktop in surface-mounted (pictured) and flush-mounted versions
Siemens' full-surface induction cooktop allows up to four pieces of cookware to be placed anywhere on its surface
2/4
Siemens' full-surface induction cooktop allows up to four pieces of cookware to be placed anywhere on its surface
Siemens' full-surface induction cooktop provides cooktop flexibility
3/4
Siemens' full-surface induction cooktop provides cooktop flexibility
Siemens' full-surface induction cooktop boasts up to 48 conductors to form a continuous cooking surface
4/4
Siemens' full-surface induction cooktop boasts up to 48 conductors to form a continuous cooking surface
View gallery - 4 images

Earlier this year at CES 2012, Siemens subsidiary Thermador unveiled its Freedom Induction Cooktop that allows pots and pans of various sizes to be placed anywhere on its surface instead of being constrained to fixed cooking zones. Now Siemens has shown its own full-surface induction cooktop that provides the same freedom of cookware placement.

Unlike other induction cooktops that use four inductors under a ceramic surface to provide four fixed cooking zones, Siemens’ unit boasts up to 48 conductors to form a continuous cooking surface. Placing a pot anywhere on the ceramic surface activates a group of induction modules that automatically interconnect to form a single unit that can be controlled like a dedicated cooking zone.

The surface can accommodate up to four pieces of cookware at once, with a color TFT touch screen displaying the size, shape and location of each piece. Power can be individually adjusted via the touchscreen and if a pot is moved, the display automatically updates and the power levels are automatically transferred to the new position.

Operating instructions in up to 15 languages can also be viewed in the cooktop’s display. Siemens says that because heat is only produced where it is needed, the unit is more energy efficient than fixed cooking zone induction cooktops.

Siemens is currently showing its full-surface induction cooktop at Eurocucina 2012 as part of the Milan furniture show and it recently picked up a red dot product design award 2012 for the unit. The company is currently offering two models, one for flush-mounted installation and the other a surface mounted version with a stainless steel frame. Both measure 80 cm (31.5 in) wide.

Source: Siemens

View gallery - 4 images
10 comments
10 comments
Gadgety
I like it. However my current cooking top is 35.5 (90cm) wide, so it would entail replacing all the Canadian blue eyes Anothorsite stone, so that would add another $10.000 to the bill. Hopefully they'll bring out more sizes.
Trux Tee
9.0 (90% power?) is too hot for fish and garlic! (image 2 of 4) ^^
Richard Vahrman
Interesting - but still think the biggest revolution would be a cooker that can deliver heat at a know temperature (measured in the pan) for a fixed time. Not that difficult, surely.
MasterG
Does have to be the same rectangle as a normal stovetop? Im looking for a stove that takes 4 but in a row that can be fitted close to the wall and out of reach of little people.
Dan Veronese
It's still not gas. Forget it.
Gregg Eshelman
The "con" with all induction stovetops is they require ferrous metal cookware. That means cast iron or lower grades of stainless steel.
Top grade non-magnetic stainless pans either won't work or works very poorly. Copper plating also tends to interfere with the magnetic coupling required for induction heating.
Vered Shalom
can it be deigned to switch off if water has boiled away?
pmshah
I found a solution to the "magnetic" material problem. Unless what you are cooking something that is quite dry, you can simply drop a slug of magnetic stainless steel into the food itself and see it do its job ! Should work with Corelle - Pyrex or non magnetic metallic utensils.
At present I use a four burner gas stove. Quite often have 4 different items cooking at different heat levels. I may also need to quickly move one to a non ACTIVE burner to either prevent over cooking or charring the food while having to stir another at a steady rate. The all area idea would be not only totally useless but detrimental.
AbhiJaki
Induction is extremely easy to clean because the cook top does not get hot except where the pan sits. There is a learning curve and the base of your pans must be ferrous. Just take a magnet. If it sticks to the base, it works on induction. You can buy a very inexpensive induction hotplate first to see if you like it. It is also MUCH MORE energy efficient.
dsiewert
Gaggenau has had this feature for several years in the CX491 cook surface. I hope having a second entry into this arena will spark additional competition.
I've enjoyed induction cooking in that waste heat isn't dumped into the kitchen. It supports all my cast iron cookware, and only the cheapest stainless made pots aren't induction ready.
Many of the induction cooktops turn off automatically if a pot is removed, and most will detect a temperature run-away (in the situation of a pot boiled dry) and turn off as well.
Have to admit that it's very hard to beat the gentle heat of a gas flame, but my air-conditioning bill really likes induction cooking.